Bacharach Flue-Gas Sample Conditioning System Dokumentacja Strona 27
- Strona / 86
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
ECA 450 Operation
Instruction 0024-9400
23
4. Use ∧∨ keys to place cursor next to one of the following three methods of
storing test data:
Logging
ª Internal
PC
Both
• Internal: Stores test data in the analyzer’s internal memory (over
1000 data sets can be saved).
• PC: Sends test data out the analyzer’s RS232 port to a personal
computer. Before using this method, however, a personal computer
must be connected to the analyzer and configured to store received
data on its hard drive (refer to Section 2.11 Downloading Data to a
Personal Computer).
• Both: Stores test data in the analyzer’s internal memory, and also
sends the test data out the analyzer’s RS232 port.
After choosing the logging method, press ENTER to make the selection
and display the Logging Interval screen.
5. The default interval (the time period between measurements) is
10 minutes. To change this value, use
∧∨ keys to select either 1, 5, 10, 15,
30 seconds, 1, 2, 5, 10, 15, 30 minutes, or 1 hour. Then press ENTER to
make the selection and display the Logging Duration screen.
Logging Interval
10 min
6. The logging duration is the length of time allocated to collecting data. Use
the
∧∨ keys to select either 1, 5, 10, 15, 30 minutes, 1, 2, 5, 10, 24, 48, or
72 hours. Then press ENTER to make the selection and display the
Logging Summary screen.
Note: The duration value can never be less than the interval.
Logging Duration
2 hr
7. The Logging Summary screen shows both the logging interval and
duration as chosen in Steps 5 and 6. For example: if the interval was set
to 10 minutes, and the duration set for 2 hours, then a combustion test
will be conducted every 10 minutes over a 2 hour period — for a total of
12 readings. To change either the interval or duration value, press ESC
to abort the logging process and redisplay the first Logging screen.
Logging Summary
Interval 10 min
Duration 2 hr
Press ENTER to start
- Model 450 1
- Notice: 2
- Table of Contents 3
- Contents ECA 450 4
- 1 Introduction 5
- 1.3 Technical Data 6
- Accuracy: 7
- 4 Instruction 0024-9400 8
- 1.4 Operation Overview 9
- Introduction ECA 450 10
- 6 Instruction 0024-9400 10
- 1.5.3 POWER (AC Adapter) 11
- 1.5.6 OPT (Option) 11
- 8 Instruction 0024-9400 12
- CALIBRATE 13
- 10 Instruction 0024-9400 14
- 2 Operation 15
- 2.3 Fuel Selection 16
- ECA 450 Operation 17
- Instruction 0024-9400 17
- Operation ECA 450 18
- 14 Instruction 0024-9400 18
- 2.7 Saving Test Data 20
- 2.8 Clearing Memory 20
- 18 Instruction 0024-9400 22
- 2.10 Printing Data 23
- 20 Instruction 0024-9400 24
- 2.12 Data Logging 26
- 24 Instruction 0024-9400 28
- Line 1: Column Headings 30
- 2.14.1 Thermocouple Method 31
- 28 Instruction 0024-9400 32
- 2.14.3 Thermometer Method 33
- 30 Instruction 0024-9400 34
- 2.16 Statistics Mode 36
- 34 Instruction 0024-9400 38
- 2.17.1 Temperature Units 40
- 2.17.2 Pressure Units 40
- 2.17.3 Pollution Units 40
- 2.17.4 Language 41
- 2.17.5 Date 41
- 2.17.6 Time 42
- 2.17.7 O 42
- Reference 42
- 2.17.8 Test ID 43
- 40 Instruction 0024-9400 44
- 42 Instruction 0024-9400 46
- 2.17.9 Display Timeout 47
- 2.17.10 Display Format 47
- 44 Instruction 0024-9400 48
- 2.17.11 Primary Air 49
- 2.17.12 Data Logging 49
- 2.17.13 Statistics 49
- 2.17.14 User Name 49
- 2.17.15 Keypad Sound 50
- 2.17.17 Print Pressure 52
- 2.17.18 Information 52
- 3 Calibration 53
- PRESSURE 54
- ECA 450 Calibration 55
- Calibration ECA 450 56
- 52 Instruction 0024-9400 56
- 3.7 Calibrate HC Sensor 58
- 3.8 Calibrate CO-LO Sensor 59
- 56 Instruction 0024-9400 60
- 3.9 Calibrate SO 61
- Sensor 61
- 3.10 Calibrate NO Sensor 62
- 3.11 Calibrate NO 63
- 3.12 Calibrate CO-HI Sensor 64
- 4 Maintenance 65
- Maintenance ECA 450 66
- 62 Instruction 0024-9400 66
- ECA 450 Maintenance 67
- 64 Instruction 0024-9400 68
- 4.4.1 O 69
- , CO, NO, NO 69
- , & SO 69
- Sensor Replacement 69
- 66 Instruction 0024-9400 70
- 4.4.3 HC Sensor Replacement 71
- PARTICULATE FILTER 72
- (Install with arrow pointing 72
- WATER TRAP/FILTER ASSEMBLY 73
- GAS HOSE 73
- RESET BUTTON 74
- 5 Troubleshooting 76
- 5.3 Error Symbols 77
- 5.4 Troubleshooting Guide 78
- ECA 450 Parts & Service 79
- 76 Instruction 0024-9400 80
- 78 Instruction 0024-9400 82
- 6 Parts & Service 83
- 6.2 Accessories 84
- 6.3 Service Centers 85
Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Bacharach Flue-Gas Sample Conditioning System
(100 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.069 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji