Pur•Chek™ Pro O
peration and Maintenance Instruction Manual
8 P/
N 2
100-9001 Rev 2
4. O
peration
4.1. Battery Installation
The Pur•Chek™ Pro has an optional i
nternal rechargeable battery. If your Pur•Chek™ Pro is equipped
with the optional rechargeable battery, you must first install and charge the battery prior to use.
NOTE: T
he Pur•Chek™ Pro can be operated with or without the battery using the supplied AC
adapter.
To install the optional battery, remove the battery cover from the back of the unit by unscrewing the two
P
hillips head screws as shown in
Figure 4-1.
Fi
gure 4-1. Location of Battery Compartment Screws
Inside the Pur•Chek™ Pro battery compartment, locate the male plug on the left side. Slide the nylon
strap around the battery. Insert the battery module into the compartment aligning the female connector of
the battery module with the male plug in the battery compartment. Replace the cover and snug the
screws.
NOTE: C
harge the battery for a minimum of 4 hours with the supplied charger prior to first
use. The battery cannot be charged with the standard power adapter.
To r
emove the battery, simply tug gently on the nylon strap, being sure to pull straight up, until the battery
is dislodged. The battery may be charged either inside of the unit or independent of the unit.
4.2. Turning On the Unit
Connect the included AC power supply to the 12 VDC power input jack on the back of the unit (refer to
Figure 3-6 on page 7). Plug in the AC power supply to a 110-240 VAC outlet.
NOTE: I
f the optional battery module is installed and charged, the AC power supply is not
required.
Komentarze do niniejszej Instrukcji